Canon MF6590 imageCLASS MF6500 Series Basic Operation Guide - Page 181

Fuser Roller 4 Pull out the multi-purpose tray If black streaks appear with printing, the extension until it clicks, then open fuser roller in the main unit may be dirty. it. Should this occur, clean the fusing roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper into the multi-purpose tray and start cleaning. Cleaning the roller takes approximately 100 seconds. 1 Press [Additional Functions]. 5 Load a sheet of blank LTR paper. 2 Press [ ] or [ ] to select , then press [OK]. 3 Open the multi-purpose tray. 6 Press [ ] or [ ] to select , then press [OK]. Cleaning starts. When finished, the display returns to the standby mode. - Use standard paper as the cleaning paper. - Throw away the cleaning paper after use. Maintenance 10-6