Canon PIXMA MP620 User Manual - Page 343

Setting Up the Card Slot as the Memory Card Drive of the Computer Page 343 of 815 pages Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Setting Up the Card Slot as the Memory Card Drive of the Computer Setting Up the Card Slot as the Memory Card Drive of the Computer The Card Slot of the machine can also be used as the memory card drive of the computer. Note For details on using the Card Slot over a network, see Using the Card Slot over a Network . In Macintosh, you cannot write data to a memory card in the Card Slot over a network. Important When Read/write attribute in Advanced settings under Device settings is set to Writable from USB PC or Writable from LAN PC using the Operation Panel of the machine, card direct printing cannot be done. After using the Card Slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Not writable from PC. When you turned off the machine, Writable from USB PC to Writable from LAN PC will be canceled and the setting is returned to Not writable from PC when you turn on the machine next time. 1. Make sure that the memory card is not set. If the memory card is set, remove it from the Card Slot. For details, refer to Printing from a Memory Card. 2. Select Settings on the HOME screen, then press the OK button. 3. Select Device settings, then press the OK button. 4. Select Advanced settings, then press the OK button. 5. Select Read/write attribute, then press the OK button. 6. Specify the read/write attribute. Not writable from PC The Card Slot is used only for reading. Be sure to select this mode when printing photos from a memory card. Writable from USB PC The Card Slot is used as the memory card drive of a USB connected computer. Data can be written into the memory card from the USB connected computer. Writable from LAN PC The Card Slot is used as the memory card drive of a Net work connected computer. Data can be written into the memory card from the Net work connected computer. 7. Press the OK button. Important If you used the Card Slot as the memory card drive of the computer, you need to do a "safe removal" operation on your computer before physically removing the memory card from your machine. In Windows, right-click the Removable Disk icon and click Eject. If Eject is not displayed on the screen, confirm that the Access lamp is not flashing and remove the memory card. Over a network: The removal operation is not needed.