Canon PIXMA MP620 User Manual - Page 689
Check 4: Open the Scanning Unit Cover and make sure that the ink
View all Canon PIXMA MP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 689 highlights
Printing Does Not Start Page 689 of 815 pages Advanced Guide > Troubleshooting > Printing Does Not Start Printing Does Not Start Check 1: Make sure that the power plug is securely plugged in, then turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green. Note When printing large data such as a photo or graphics, it may take longer to start printing. While the Power lamp is flashing green, the computer is processing data and sending it to the machine. Wait until printing starts. Check 2: Check the status of ink tanks. Replace the ink tank if ink has run out. Check 3: Open the Scanning Unit (Cover) and check to see if the ink lamps are flashing red. If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a right position. Routine Maintenance Check 4: Open the Scanning Unit (Cover) and make sure that the ink lamps light up red. If the ink lamp is not lit, press the mark on the ink tank until it clicks into place. Check 5: Make sure that the machine is connect to your computer properly. When the machine is connect to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the following: If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. There could also be a problem with the USB cable. Replace the USB cable and try printing again. When you use the machine over LAN, make sure that the machine is connected to the network with a LAN cable or is set up correctly. For details, refer to your setup manual. Check 6: Restart your computer if you are printing from the computer. If there are any unnecessary print jobs, delete them. Deleting the Undesired Print Job Check 7: Make sure that your machine's name is selected in the Print dialog box. The machine will not print properly if you are using a driver for a different printer. In Windows, make sure that your machine's name is selected in the Print dialog box. On a Macintosh, make sure that your machine's name is selected in Printer in the Print dialog box. Note To make the machine the one selected by default, select Set as Default Printer (Windows), Default Printer or Make Default (Macintosh).