Canon PIXMA MP620 User Manual - Page 646

Changing the Machine Settings on the LCD Print settings LAN settings Advanced settings Mobile phone print setting Bluetooth settings PictBridge print settings Language selection Reset setting Page 646 of 815 pages Plain paper feed settings Specifies the paper source for A4, Letter, A5, and B5 plain paper. Note A4, Letter, A5, and B5 paper can be loaded in the Cassette. Load on the Rear Tray for the other sizes of paper. Print settings Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. Extended copy amount Selects the amount of image that extends off the paper when printing in Borderless (full). Important This setting can be applied only when copy or easy photo reprint mode is selected. Note If printouts contain margins even though you are printing in Borderless, specifying Large for this setting may help solve the problem. LAN settings Change wireless/wired Activates wired or wireless LAN. Note When you change the connection method (wired or wireless), set up the machine according to the method you will use. For details, refer to your setup manual. Wireless LAN settings Selects the setting method for wireless LAN connection. WPS setting Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method or PIN method according to the method your access point supports, then follow the on-screen instructions. WCN setting Select when you perform settings for wireless LAN using Windows Connect Now (WCN) feature. You need a USB flash drive on which settings for wireless LAN are saved. Wireless LAN setting list The list of wireless LAN settings of this machine is displayed on the LCD. The following setting items are displayed. Items Setting (IPv4) Setting (IPv6)