Canon PIXMA MP620 User Manual - Page 89

Replacing Procedure Important You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the Print Head Holder. You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. Page 89 of 815 pages 6. Close the Scanning Unit (Cover) gently. Caution Be sure to hold the Scanning Unit (Cover) firmly using both hands, and be careful not to get your fingers caught. Do not hold the LCD or the Operation Panel. Note If the error message appears after the Scanning Unit (Cover) is closed, refer to " Troubleshooting " in the on-screen manual: Advanced Guide. When you start printing after replacing the ink tank, the machine starts cleaning the Print Head automatically. Do not perform any other operations until the machine completes the cleaning of the Print Head. If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head position. See Aligning the Print Head. The machine may make noise during operation, but this is normal. Page top