Canon PIXMA MP620 User Manual - Page 798
Cannot Mount the Card Slot
View all Canon PIXMA MP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 798 highlights
Cannot Mount the Card Slot Page 798 of 815 pages Advanced Guide > About Network Communication > Troubleshooting > Cannot Mount the Card Slot Cannot Mount the Card Slot The Available Drive Letter Cannot Be Selected on the Network Setup of the Card Slot Dialog Box The Card Slot Cannot Be Mounted with the Canon IJ Network Tool The Available Drive Letter Cannot Be Selected on the Network Setup of the Card Slot Dialog Box On this dialog box, only D to Z can be selected as the network drive for the Card Slot. When the Card Slot has been set up to be used over network, you cannot select a drive letter. If you want to assign another drive letter to the network drive for the Card Slot, disconnect it from the network, then set up the Card Slot again using the Canon IJ Network Tool. Using the Card Slot over a Network The Card Slot Cannot Be Mounted with the Canon IJ Network Tool If you cannot mount the Card Slot to use it over network with the Canon IJ Network Tool, follow the procedure below to mount the Card Slot manually. 1. Check the Default Name of the machine by selecting Network Information on the View menu of the Canon IJ Network Tool. 2. Click Start > All Programs > Accessories > Run. In Windows XP and Windows 2000, click Start > Run. 3. Input "\\xxxxxxxxxxxx\", then click OK. "xxxxxxxxxxxx" is the string of 12 alphanumeric characters of the Default Name. For example, if the Default Name is "0000000847B6\canon_memory", then input only "\\0000000847B6\". Note If you cannot mount the Card Slot with the method above, input the IP address of the machine instead of the 12 alphanumeric characters of the Default Name, and try again. For example, "\\192.168.1.1\". If you mount the Card Slot with the IP address, you have to remount it whenever the machine's IP address changes. 4. When the Drive. canon_memory icon appears, right-click the icon, then select Map Network 5. Select the drive letter, then click Finish. Page top