Canon PIXMA MP620 User Manual - Page 648

Changing the Machine Settings on the LCD Page 648 of 815 pages scanning operation may become impossible. To use the machine over network, refer to your setup manual. Be careful when you initialize the network settings on the machine. Note When you initialize the network settings using the Canon IJ Network Tool, refer to Initializing the Network Settings of the Machine . Advanced settings Date display Changes the display format of shooting dates when printed. Note When Date ON is selected on the advanced print settings screen in memory card mode, the shooting date is printed in the date display format you selected. For print settings, see Setting Items. The shooting date format is as specified in the DPOF setting from DPOF printing. Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important Remove the memory card before changing this setting. For details, see Setting Up the Card Slot as the Memory Card Drive of the Computer . If you set this setting to Writable from USB PC or Writable from LAN PC, card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to set it back to Not writable from PC. When you turn off the machine, Writable from USB PC or Writable from LAN PC will be canceled and the setting is returned to Not writable from PC when you turn on the machine next time. Slide show setting Specifies the image display quality of the slide show. Note When Image quality: Standard is selected, images are displayed at about 5-second intervals. When Image quality: High is selected, images are displayed at different time intervals according to their resolutions. Quiet mode Enables this function on the machine if you want to reduce the operating noise, such as when printing at night. Enabling this function reduces the noises generated while: Copying, Printing from a memory card, Printing from a PictBridge compliant device, Printing from a wireless communication device, and Printing a template form. Important Printing speed may be reduced compared to when this setting is set to OFF. This function may not be so effective depending on the print quality setting. Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced. Note The noises generated while scanning or printing from the computer can also be reduced. To reduce these noises, you need to configure the settings on the computer. For the noises while scanning, refer to Scanner Tab. For the noises while printing from the computer, refer to Reducing the Machine Noise . Guide display settings Changes the time before the guidance is displayed on the LCD, or selects not to be displayed.