Canon PIXMA MP620 User Manual - Page 770

Changing the Settings in the Wireless LAN Sheet Page 770 of 815 pages Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Changing the Settings in the Wireless LAN Sheet Changing the Settings in the Wireless LAN Sheet To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings. Note Select Wireless LAN active in the Change wireless/wired on the Operation Panel to change the settings in the Wireless LAN sheet. Changing the Machine Settings on the LCD 1. Start up the Canon IJ Network Tool. Starting up Canon IJ Network Tool 2. Select the printer in Printers. 3. Select Configuration from the Settings menu. 4. Click the Wireless LAN tab. Click OK after changing configuration. A dialog box is displayed asking you for confirmation before the settings are sent to the printer. If you click Yes, the settings are sent to the printer and the Transmitted Settings dialog box is displayed. 1. Network Type Infrastructure Connects the printer to the wireless LAN with an access point. 2. SSID The SSID of the wireless LAN is displayed Note Enter the same SSID that the access point is configured to use. The SSID is case sensitive. 3. Search The Search dialog box is displayed to select an access point to connect to. Search dialog box