Canon PIXMA MP620 User Manual - Page 622

Setting the Printer Page 622 of 815 pages Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the Printer Setting the Printer This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the printer in preparation for Bluetooth printing. The screens may differ depending on the printer you are using. If you need more information about the Bluetooth settings, see Setting Bluetooth Printing . 1. Make sure that the Bluetooth unit is attached and the printer is turned on. For information about how to attach the Bluetooth unit, see Attaching to and Removing from the Printer. 2. Display the Bluetooth settings screen on the LCD. For information about how to display the Bluetooth settings screen, refer to Changing the Machine Settings on the LCD. Note If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be attached correctly. Remove the Bluetooth unit from the printer and attach it once again. For details, see Attaching to and Removing from the Printer . If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In this case, contact your Canon service representative. 3. Select Device name. The Device name screen is displayed. 4. Check the device name. The device name is necessary to register the printer as a Bluetooth device. Be sure to note the device name. Note If multiple printer units with the same model name are connected to the system, assigning a different device name to each printer is recommended for easy identification of the printer you will use. See Bluetooth Settings Screen . After checking the device name, press the OK button on the printer.