Canon PIXMA MP620 User Manual - Page 667

An Error Message Is Displayed on the LCD Page 667 of 815 pages The following ink has run out. Replace the ink tank. U163 Replace the ink tank. Routine Maintenance Ink has run out. (The lamp on the ink tank flashes.) Replace the ink tank and close the Scanning Unit (Cover). Printing under the current condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition. Routine Maintenance Note If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the LCD when checking the current ink level. Routine Maintenance There are no photos in memory card. Contact the support center or service center for ink absorber replacement. Press OK to continue printing. Ink absorber full. Service required. Timeout error has occurred. The device may be incompatible. Remove the device and check the manual supplied with the connected device. There is no image data saved on the memory card that can be read by this machine. The machine may not recognize the file if the file name or the folder path contains certain characters. Use only alphanumeric characters. Photo data edited or processed on a computer must be printed from the computer. The ink absorber is becoming full. The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning. Press the OK button to cancel the error so you can continue printing. Before the ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the machine.) The ink absorber has become full. The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning. When the ink absorber becomes completely full, contact a Canon service representative. (You will need to replace a particular part of the machine.) Some errors occurred while copying and a certain time passed. Press the OK button to dismiss the error, and try to copy again. Check the device connected to the Direct Print Port. Printing photos directly is possible with a PictBridge compliant device or the optional Bluetooth Unit BU-30. A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual. If the error is still not resolved, check if you can print another photograph.