Canon PIXMA MP620 User Manual - Page 772
WEP Details dialog box
View all Canon PIXMA MP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 772 highlights
Changing the Settings in the Wireless LAN Sheet Page 772 of 815 pages 1. Detected Access Points The signal strength from the access point, encryption type, name of access point, and the radio channel can be confirmed. Important If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. Note Signal strength is displayed as follows. : Good : Fair : Poor Type of encryption is displayed as follows. Blank: No encryption WEP: WEP is set WPA: WPA is set WPA2: WPA2 is set 2. Update Click to update the list of access points when your target access point is not detected. If the target access point is set to the stealth mode, click Cancel to return to the previous screen and enter the access point's Service Set Identifier in SSID. Note Make sure that the access point is turned on. 3. Set Click to set the access point's SSID in SSID on the Wireless LAN sheet. Note Depending on your settings, WEP Details dialog box, WPA Details dialog box, or WPA2 Details dialog box appears when you click the Set button. In the dialog box, configure the details to use the same encryption settings set to the access point. Access points that cannot be used by this machine (including those configured to use different encryption methods) are displayed grayed out and cannot be configured. WEP Details dialog box Specify the printer WEP settings. When changing the password (WEP key), the same change must be made to the password (WEP key) of the access point. 1. WEP Key Enter the same key as the one set to the access point. The number of characters and character type that can be entered differ depending on the key length and key format. Key Length 64 bit 128 bit