Canon VB-S900F User Manual - Page 46
[Video] Setting Video Size, Quality and Frame Rate, All Videos, H.2641
View all Canon VB-S900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
[Video] Setting Video Size, Quality and Frame Rate The following can be set here. • All Videos Specify the set of video sizes used by the camera. • JPEG Set the video quality, size, maximum frame rate and upload size in JPEG. • H.264 Set the bit rate, video size and capture frame rate in H.264. • On-screen display Set time, character string, etc. displayed over video. All Videos (1) [Video Size Set] Select the set of video sizes used by the camera from [1920 x 1080 / 960 x 540 / 480 x 270], [1280 x 720 / 640 x 360 / 320 x 180], or [1280 x 960 / 640 x 480 / 320 x 240]. All options in the [Video] menu and the size set that can be selected in [Video Size] are determined by the set selected here. [Video Size Set] Category [1920 x 1080 / 960 x 540 / 480 x 270] 1080p [1280 x 720 / 640 x 360 / 320 x 180] 720p [1280 x 960 / 640 x 480 / 320 x 240] 4:3 Aspect ratio 16:9 16:9 4:3 Important • Changing the [Video Size Set] setting will disconnect all connections and then change all the video sizes. Consequently, users connected to the camera must reconnect. • If the [Video Size Set] selection is changed and you click [Apply and Reboot], review the following settings and check the operation. - Privacy mask settings - View restriction settings - Preset settings - Intelligent function settings JPEG (1) [Video Quality] Select a desired video quality from 1 to 5 (5 levels) for videos transmitted at each video size in JPEG. Greater values have higher quality. (2) [Video Size: video Transmission] Select the size of the transmitted video. The video sizes that can be selected depend on the [Video Size Set] setting. This becomes the start-up video size used by each viewer if no video size has been set. (3) [Maximum Frame Rate: Video Transmission] Limit the maximum transmission frame rate per second to reduce the viewer load. The maximum is 30 frames/sec. Enter a value of between 0.1 and 30.0. (4) [Video Size: Upload / Memory card] Select the size of video when using the upload function (p. 51) or when recording to a memory card (p. 69). The video sizes that can be selected depend on the [Video Size Set] setting. Use [Event] > [Video Record Action] (p. 56) to specify the destination of a video recording (upload or memory card recording). H.264(1) Configure settings using H.264(1) when using H.264 video for upload or memory card recording. H.264(2) video cannot be used for upload, memory card recording, and RM-Lite. (1) [Video Size] Select the size of the transmitted video. The video sizes that can be selected depend on the [Video Size Set] setting. (2) [Bit Rate Control] Select [Do not use bit rate control] or [Use bit rate control]. Select [Use bit rate control] when [Video Format] under [Upload] is set to [H.264(1)] or when [Video Format] under [Memory Card] is set to [H.264(1)]. 46