Casio FX-9750GII-SC User Guide - Page 338
input a value of 200%. To lower the original sound by one octave, input a value of 50%.
UPC - 079767186067
View all Casio FX-9750GII-SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
2-9 Using the Setup Wizard 7. Press 6(DRAW) to graph the function. • This graphs the function and displays a vertical cursor line as shown below. Use the graph to specify the range that you want to output to the speaker. 8. Use the d and e cursor keys to move the cursor to the start point of the output, and then press w to register it. 9. Use the d and e cursor keys to move the cursor to the end point of the output, and then press w to register it. • After you specify the start point and end point, an output frequency dialog box shown below appears on the display. / 10. Input a percent value for the output frequency value you want. • To output the original sound as-is, specify 100%. To raise the original sound by one octave, input a value of 200%. To lower the original sound by one octave, input a value of 50%. 11. After inputting an output frequency value, press w. • This outputs the waveform between the start point and end point from the EA-200 speaker. • If the sound you configured cannot be output for some reason, the message "Range Error" will appear. If this happens, press J to scroll back through the previous setting screens and change the setup as required. 12. To terminate sound output, press the EA-200 [START/STOP] key. 13. Press w. • This displays a screen like the one shown below. 20051101