Casio FX-9750GII-SC User Guide - Page 392
below appears on the display.
UPC - 079767186067
View all Casio FX-9750GII-SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
11-13 Graph Analysis Tool Graph Screen Operations 3. Move the trace pointer to the end point of the range you want to output from the speaker, and then press w. • After you specify the start point and end point, an output frequency dialog box shown below appears on the display. / 4. Input a percent value for the output frequency value you want. • The output frequency specification is a percent value. To output the original sound as-is, specify 100%. To raise the original sound by one octave, input a value of 200%. To lower the original sound by one octave, input a value of 50%. 5. After inputting an output frequency value, press w. • This outputs the waveform between the start point and end point from the EA-200 speaker. • If the sound you configured cannot be output for some reason, the message "Range Error" will appear. If this happens, press J to scroll back through the previous setting screens and change the setup as required. 6. To terminate sound output, press the EA-200 [START/STOP] key. 7. Press w. • This displays a screen like the one shown below. 8. If you want to retry output from the speaker, press 1(Yes). To exit the procedure and return to the graph screen, press 6(No). • Pressing 1(Yes) returns to the "Output Frequency" dialog box. From there, repeat the above steps from step 4. 20051101