Cisco 11503 Administration Guide - Page 100

Configuring a Boot Configuration Record for the Passive SCM Chapter 2 Specifying the CSS Boot Configuration Copying Configuration Information from the Active SCM to the Passive SCM To copy the primary and secondary boot configuration record from NVRAM of the active SCM to the passive SCM, use the passive sync command. For the CSS 11506, the passive sync command also copies the startup- configuration file and synchronizes the clock time from the active SCM to the passive SCM. This command is available in boot mode. To synchronize specific boot configuration, startup configuration, or clock time information between the active SCM and the passive SCM in a CSS 11506, use the following commands: • passive sync boot-config - Copies the boot configuration record from the active SCM to the passive SCM. • passive sync startup-config - Copies the startup-config file from the active SCM to the passive SCM. • passive sync image - Copies the ADI of the boot-image file from the active SCM to the passive SCM. • passive sync time - Synchronizes the clock time of the passive SCM with the active SCM. To copy the primary and secondary boot configuration record, startup configuration, and clock time on a CSS 11506, enter: (config-boot)# passive sync To copy the boot configuration record from the active SCM to the passive SCM in a CSS 11506, enter: (config-boot)# passive sync boot-config 2-16 Cisco Content Services Switch Administration Guide OL-5647-02