Cisco 11503 Administration Guide - Page 177

Chapter 4 Using the CSS Logging Features Frequently Queried Log Messages Table 4-8 Cisco 11500 Series CSS Log Messages (continued) Log Message (sys.log: Subsystem Name, Level, and Message) radius Subsystem RADIUS-7: Auth Primary RADIUS-7: The id is 63 RADIUS-7: Return Auth Primary RADIUS-7: RADIUS no memory available RADIUS-4: RADIUS Authentication failed with reason code 2 Cause and Resolution The RADIUS server does not have the correct attributes set up for the CSS. Refer to Cisco Content Services Switch Security Configuration Guide, for background information on setting up an ACS radius server. In this message, the different codes include: #define PW_ACCESS_REQUEST 1 #define PW_ACCESS_ACCEPT 2 #define PW_ACCESS_REJECT 3 #define PW_ACCOUNTING_REQUEST 4 #define PW_ACCOUNTING_RESPONSE 5 #define PW_ACCOUNTING_STATUS 6 #define PW_ACCESS_CHALLENGE 11 In the example above, code 2 indicates that the CSS received the Accept response from the RADIUS server but may have rejected the Accept response, perhaps due to an invalid username or password. This log message only appears when logging debug messages (debug-7) for the radius subsystem. OL-5647-02 Cisco Content Services Switch Administration Guide 4-57