Cisco 11503 Administration Guide - Page 369

Appendix B Using the Offline Diagnostic Monitor Menu Caution Use care when password protecting the Offline DM Main menu and ensure you take adequate steps to record the password. If you lose the new password, it cannot be recovered and you cannot access the Offline DM Main menu. At that point, the only solution would be to contact the Cisco Technical Assistance Center (TAC). Refer to the "Obtaining Technical Assistance" section in the Preface. To access the Offline DM Main menu password protection option: 1. Select option 1 from the Security Options menu. Password protect Offline Diagnostic Monitor menu (yes,no): The administrative username and password are required to access the Offline Diagnostic Monitor menu. • If you enter yes, the CSS prompts you to enter a username and password when you access the Offline DM Main menu. • If you enter no, the CSS does not prompt you for a username and password when you access the Offline DM Main menu. 2. Press Enter to display the Security Options menu. Press to continue... 3. Enter r to return to the Advanced Options menu. 4. Enter r to return to the Offline DM Main menu. 5. Enter 4 to reboot the CSS, or select another option to continue using the Offline DM Main menu. Changing the Administrative Username and Password During the initial log in to the CSS, you enter the default user name admin and the default password system as lowercase text. For security reasons, you should change the administrative username and password through the Security Options menu. Security on your CSS can be compromised because the administrative username and password are configured in the same way for every CSS. Note You may also use the username-offdm CLI command to change the default administrative username and password (refer to the Cisco Content Services Switch Getting Started Guide). OL-5647-02 Cisco Content Services Switch Administration Guide B-19