Cisco 11503 Administration Guide - Page 196

Defining the CSS as an SNMP Agent Chapter 5 Configuring Simple Network Management Protocol (SNMP) Configuring an SNMP Community To set or modify SNMP community names and access privileges, use the snmp community command. You may specify as many community names as you wish. Caution You must define the community strings for each access type (read-only or read-write) before you use SNMP on the CSS. The CSS is inaccessible until you specify a read community string. The syntax for this global configuration mode command is: snmp community community_name [read-only|read-write] The variables and options for this command are: • community_name - The SNMP community name for this system. Enter an unquoted text string with no space and a maximum of 12 characters. • read-only - Allows read-only access for this community. • read-write - Allows read-write access for this community. For example: (config)# snmp community sqa read-write To remove a community name, enter: (config)# no snmp community sqa 5-14 Cisco Content Services Switch Administration Guide OL-5647-02