Cisco 11503 Administration Guide - Page 191

Chapter 5 Configuring Simple Network Management Protocol (SNMP) SNMP Communities Loading the CSS MIBs We recommend that you update the CSS Enterprise MIBs after you upgrade the CSS software. CSS MIBs are included in the CSS GZIP file. During the software upgrade, the MIBs are loaded into the CSS /mibs directory. For details about the CSS MIBs, see the "CSS MIBs" section. To update the CSS MIBs on your management station after you upgrade the CSS: 1. Transfer the CSS MIBs using FTP from the CSS MIBs (/v1 or /v2) directory to your management station. Note The CSS implementation of FTP does not support the mget command, which is used for multiple file transfers. 2. Load the CSS MIBs into the management application. Note The /v2 directory contains the full set of CSS v2 MIBs. The /v1 directory contains only those CSS v1 MIBs that will compile using a v1 compiler. If you do not find a MIB that you need in the /v1 directory, use the corresponding MIB in the /v2 directory. SNMP Communities Each SNMP device or member is part of a community. An SNMP community determines the access rights for each SNMP device. You supply a name to the community. After that, all SNMP devices that are assigned to that community as members have the same access rights. The access rights that the CSS supports are: • read - Allows read-only access to the MIB tree for devices included in this community • read-write - Allows both read and write access to the MIB tree for devices included in this community OL-5647-02 Cisco Content Services Switch Administration Guide 5-9