Cisco 11503 Administration Guide - Page 46

Using the Running-Config and Startup-Config Files Chapter 1 Managing the CSS Software • show running-config urql {urql name} - Displays the components of the running-config file for existing uniform resource locator qualifier lists (URQL). For information about a specific URQL, enter the URQL name as a case-sensitive unquoted text string. The following example shows a running-config file. Comments are preceded by an exclamation point (!). Note that the CSS does not display default values in the CSS running configuration or startup configuration even if you manually enter the values. # show running-config GLOBAL ip route 0.0.0.0/0 158.3.7.2 INTERFACE interface e1 bridge vlan 2 interface e2 bridge vlan 2 CIRCUIT circuit VLAN1 ip address 10.3.6.58 255.255.255.0 circuit VLAN2 ip address 158.3.7.58 255.255.255.0 SERVICE service serv1 ip address 10.3.6.1 active service serv2 ip address 10.3.6.2 active OWNER owner arrowpoint.com content rule1 ip address 158.3.7.43 protocol tcp port 80 add service Serv1 add service Serv2 active 1-12 Cisco Content Services Switch Administration Guide OL-5647-02