Cisco 11503 Administration Guide - Page 157

Chapter 4 Using the CSS Logging Features Frequently Queried Log Messages Table 4-8 Cisco 11500 Series CSS Log Messages (continued) Log Message (sys.log: Subsystem Name, Level, and Message) Cause and Resolution circuit Subsystem CIRCUIT-7: Circuit status message for circuit 1023 sent to CE 20202c01 cause code is 7 Codes indicate the status of interfaces within VLANs. The logical port cause and command codes are as follows: Cause Code CM_CIRCUIT_CREATED 1 CM_IP_REGISTER 2 CM_IP_NOT_REGISTER 3 CM_IP_MODIFIED 4 CM_LP_STATE_CHG 5 CM_CIRCUIT_REMOVED 6 CM_LP_ADDED 7 CM_LP_REMOVED 8 CM_LP_MODIFIED 9 CM_LP_FAILOVER 10 CM_CIRCUIT_DOWN 11 This log message indicates that a port has been added to a VLAN. This log message can occur when the association to a VLAN changes as the port transitions from an up to a down state. Use the show circuit command to list the VLANs (refer to the Cisco Content Services Switch Routing and Bridging Guide). Check the status of the ports of the VLAN or determine whether the VLAN is active. OL-5647-02 Cisco Content Services Switch Administration Guide 4-37