Cisco 11503 Administration Guide - Page 158

Frequently Queried Log Messages Chapter 4 Using the CSS Logging Features Table 4-8 Cisco 11500 Series CSS Log Messages (continued) Log Message (sys.log: Subsystem Name, Level, and Message) csdpeer Subsystem CSDPEER-7: LR Send list too small !!! flowmgr Subsystem FLOWMGR-4: Flow manager received an illegal message with code 10 Cause and Resolution The number of domain names sent by the peer exceeds the size of the CSS list. You can configure this parameter through the (config) dns-peer command (see the Cisco Content Services Switch Global Server Load-Balancing Configuration Guide). We recommend that you configure the receive and send slots with the same value. The default slot value is 255. One of the Ethernet ports received a high number of malformed packets, resulting in an overflow of the fastpath. In this case, the flow manager received a badly formatted control message from the fastpath. This problem may be due to intermittent hardware, which results in the fastpath corrupting the packets, or the problem is related to the fastpath receiving streams of malformed packets and leaking some of those packets to the flow manager. Use the show ether-errors command to display information for a port that is experiencing many errors (refer to the Cisco Content Services Switch Routing and Bridging Guide). Try disconnecting the port or changing ports and determine whether the errors stop. 4-38 Cisco Content Services Switch Administration Guide OL-5647-02