Cisco 11503 Administration Guide - Page 305
socket send
UPC - 746320664958
View all Cisco 11503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Chapter 8 Using the CSS Scripting Language Using socket Commands The options and variables are: • host - Keyword that must be followed by the host name or IP address of the remote CSS. • ip_address - The host name or the IP address of the remote CSS. • port - Keyword that must be followed by the port on which to negotiate a connection. • number - The port number on which to negotiate a connection. • tcp - Keyword that specifies a connection using TCP. • udp - Keyword that specifies a connection using UDP. • timeout - Timeout value for making the network connection in milliseconds. If the time limit expires before the connection has been successfully made, then the attempt fails. This applies only to a TCP connection, because UDP is "connectionless". Enter an integer from 1 to 60000 ms (1 to 60 seconds). The default is 5000 ms (5 seconds). • session - Keyword that tells the socket to remain open until the session ends. If a script opens sockets in the session and does not close them, the sockets remain open until you log out. • nowait - Keyword that tells the socket to send data immediately without waiting to aggregate the data first. socket send To write data through a previously connected TCP connection, use the socket send command. Note that the socket send command clears all currently stored data in the 10-KB receive buffer. The syntax for this command is: socket send socket_number "string" {raw | base64} • socket_number - Socket file descriptor (integer form). This descriptor is returned from the socket connect command. • string - Quoted text string with a maximum of 128 characters. OL-5647-02 Cisco Content Services Switch Administration Guide 8-37