Cisco WAP4410N Administration Guide - Page 22
Using a Standard Switch to Connect the WAP4410N Access Point to the Network, STEP 1 - power adapter
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting the WAP4410N Access Point Connecting the WAP4410N Access Point to the Network 4 Using a Standard Switch to Connect the WAP4410N Access Point to the Network To connect the WAP4410N Access Point to your network using a standard switch, follow these steps. STEP 1 Use the supplied Ethernet cable to connect the Ethernet port of the access point to an Ethernet port on the switch. STEP 2 Connect the included power adapter to the Power port of the WAP4410N Access Point. STEP 3 Plug the power adapter into an electrical outlet. The LEDs on the front panel light up as soon as the WAP4410N Access Point powers on. WAP4410N Wireless-N Access Point with Power Over Internet 13
Connecting the WAP4410N Access Point
Connecting the WAP4410N Access Point to the Network
WAP4410N Wireless-N Access Point with Power Over Internet
13
4
Using a Standard Switch to Connect the WAP4410N Access
Point to the Network
To connect the WAP4410N Access Point to your network using a standard switch,
follow these steps.
STEP 1
Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the switch.
STEP 2
Connect the included power adapter to the Power port of the WAP4410N Access
Point.
STEP 3
Plug the power adapter into an electrical outlet.
The LEDs on the front panel light up as soon as the WAP4410N Access Point
powers on.