Cisco WAP4410N Administration Guide - Page 40
Configuring WPA2-Personal Mixed Security - modes
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 Configuring WPA2-Personal Mixed Security This security mode supports the transition from WPA-Personal to WPA2-Personal. You can have client devices that use either WPA-Personal or WPA2-Personal. The access point will automatically choose the encryption algorithm used by each client device. To enable wireless WPA2-Personal Mixed security, follow these steps: STEP 1 Click Wireless > Security. STEP 2 From the Security Mode drop-down menu, select WPA2-Personal Mixed. STEP 3 To enable wireless isolation within the SSID, click Enabled. STEP 4 Provide the following information: • WPA Algorithms-(Read-only) The WPA2-Personal Mixed security mode automatically chooses TKIP or AES for data encryption. • Pre-Shared Key-Enter a WPA Shared Key of 8-63 characters. • Key Renewal- Enter a key renewal timeout period, which instructs the access point how often it should change the encryption keys. The default is 3600 seconds. STEP 5 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 31