Cisco WAP4410N Administration Guide - Page 38
Configuring WAP-Personal Security, Wireless, Security, WAP-Personal, Enabled, WPA Algorithms - default
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 Configuring WAP-Personal Security Wi-Fi Protected Access (WPA) Personal (WAP-Personal) is a security standard stronger than WEP encryption and forward compatible with IEEE 802.11e. WPAPersonal is also known as WAP-PSK. To enable wireless WPA-Personal security, follow these steps: STEP 1 Click Wireless > Security. STEP 2 From the Security Mode drop-down menu, select WAP-Personal. STEP 3 To enable wireless isolation within the SSID, click Enabled. STEP 4 Provide the following information: • WPA Algorithms-WPA offers you two encryption methods, TKIP and AES for data encryption. Select the type of algorithm you want to use, TKIP or AES. The default is TKIP. • Pre-Shared Key-Enter a WPA Shared Key of 8-63 characters. • Key Renewal- Enter a key renewal timeout period, which instructs the access point how often it should change the encryption keys. The default is 3600 seconds. STEP 5 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 29