Cisco WAP4410N Administration Guide - Page 36
Configuring Security, Wireless, Security, Select SSID, Enabled, Disabled - wireless isolation
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 Configuring Security The Wireless > Security page displays the wireless security settings of the access point. To configure the wireless security settings of the access point, follow these steps: STEP 1 Click Wireless > Security. STEP 2 To configure wireless isolation between SSIDs: a. From the Select SSID drop-down menu select an SSID. b. To isolate wireless clients from each other, click Enabled. Otherwise, click Disabled. STEP 3 To disable wireless security completely, from the Security Modes drop-down, select Disabled. This is the default setting. WAP4410N Wireless-N Access Point with Power Over Internet 27
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
27
6
Configuring Security
The Wireless > Security page displays the wireless security settings of the
access point.
To configure the wireless security settings of the access point, follow these steps:
STEP 1
Click
Wireless
>
Security
.
STEP 2
To configure wireless isolation between SSIDs:
a.
From the
Select SSID
drop-down menu select an SSID.
b.
To isolate wireless clients from each other, click
Enabled
. Otherwise, click
Disabled
.
STEP 3
To disable wireless security completely, from the Security Modes drop-down,
select
Disabled
.
This is the default setting.