Cisco WAP4410N Administration Guide - Page 89

Specifications D WAP4410N Specifications (Continued) Multiple BSSID Supports up to 4 BSSIDs allowing creating of multiple virtual access points VLANs Supports 802.1q - up to 4 VLANs SSID to VLAN mapping Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains 802.1x Supplicant Supports 802.1x Supplicant on the Ethernet port to allow the AP to authenticate itself to the network Spanning Tree Supports 802.1d Spanning Tree protocol to prevent loops when using WDS links as redundant links in a distribution system Operating Modes Access Point Mode, point-to-point Bridge Mode, point-tomultipoint Bridge Mode, Repeater Mode, Wireless Client Mode Load Balancing This capability allows the bandwidth control with user defined CPU usage ratio Auto-channel selection On boot up, the AP selects the least congested channel 802.11d With 802.11d Regulatory Domain support, the AP provides radio channel settings for client devices facilitating easy client access as they move across regulatory domains WEP/WPA/WPA2 WEP 64bit/128bit, WPA-TKIP, WPA2-AES, WPA-Enterprise, and WPA2-Enterprise Access Control Wireless Connection Control: MAC-Based SSID Broadcast SSID Broadcast Enable/Disable Client Isolation Supports wireless client isolation between SSIDs 802.1x Wireless clients can be authenticated through IEEE 802.1x 802.1x Supplicant Supports 802.1x Supplicant on the Ethernet port to allow the AP to authenticate itself to the network Radius Server Up to 2 Radius Servers can be configured for redundancy purposes WPS Supports WPS (WiFi Protected Setup), which is a WIFI Alliance specification for simple and secure setup of a wireless network. WAP4410N Wireless-N Access Point with Power Over Internet 80