Cisco WAP4410N Administration Guide - Page 90
Rogue AP Detection, Device Dimensions - wireless n access point specs
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Specifications D WAP4410N Specifications (Continued) Rogue AP Detection New access points detected, which have not been categorized as known, are logged as rogue access points. This allows the administrator to control unapproved devices in the network. QoS 4 queues, 802.1p VLAN priority, WMM Wireless priority, Mapping of 802.1p priority to WMM priority to maintain end-to-end QoS Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM, 11n/MIMO-OFDM Channels Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan) Internal Antenna None External Antennas 3 (omni-directional) Transmit Power Transmit Power at Normal Temp Range for FCC: 11b - 16 dBm@1TX, 19 dBm@2TX, 20.5dbm@3TX; 11g - 13 dBm@1TX, 16 dBm@2TX, 19dbm@3TX 11n - 20 dBm@MCSO~4/8~12, 18dBm@MCS5/13, 14dBm@MCS6/14, 12dBm@MCS7/15 Transmit Power at Normal Temp Range for ETSI: 11b/g/n: 18.5dBm Antenna Gain in dBi 2 Receiver Sensitivity 11.n: 300Mbps@ -69dBm, 11.g: 54Mbps@ -73dBm, 11.b: 11Mbps@ -88dBm Device Dimensions 6.69X6.69X1.60 inches (170X170X40.7mm) 0.86 lbs. (0.39 kg) Power 12V 1A DC input, and IEEE802.3af Compliant PoE. Maximum power draw is 10.1 Watts. Certification CC, CE, IC Operating Temperature 32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to 158°F (-20°C to 70°C) Operating Humidity 10% to 85% Non-Condensing Storage Humidity 5% to 90% Non-Condensing WAP4410N Wireless-N Access Point with Power Over Internet 81