Cisco WAP4410N Administration Guide - Page 37
WPA-Personal, WPA2-Personal Mixed, WPA-Enterprise, Radius, Enabled., STEP 4
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 STEP 4 To enable wireless security, from the Security Mode drop-down menu, select one of the following security modes and provide the required information, as described in the sections below. • WPA-Personal • WPA2-Personal • WPA2-Personal Mixed • WPA-Enterprise • WPA2-Enterprise • WPA2-Enterprise Mixed • Radius • WEP STEP 5 To prevent wireless computers associated to the same SSID from seeing and transferring files between each other, in the Wireless Isolation (within SSID) field, click Enabled. This feature is very useful when setting up a wireless hotspot location. The default is Disabled. STEP 6 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 28
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
28
6
STEP 4
To enable wireless security, from the Security Mode drop-down menu, select one
of the following security modes and provide the required information, as
described in the sections below.
•
WPA-Personal
•
WPA2-Personal
•
WPA2-Personal Mixed
•
WPA-Enterprise
•
WPA2-Enterprise
•
WPA2-Enterprise Mixed
•
Radius
•
WEP
STEP 5
To prevent wireless computers associated to the same SSID from seeing and
transferring files between each other, in the Wireless Isolation (within SSID) field,
click
Enabled.
This feature is very useful when setting up a wireless hotspot location. The default
is Disabled.
STEP 6
Click
Save
.