Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 119
Fault LED blinks., For information on the CR3500 RAID Controller LED indicators, see Appendix G
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
4-32 Compaq ProLiant CL380 User Guide 11. Verify that the LED indicators go through the proper self-test sequence: Fault LED blinks. Channel 1, 2, 3 activity LED flashes. Heartbeat LED and drive channel LED (Channel 2) illuminates briefly. Heartbeat LED continuously blinks throughout operation. (The drive Channel LED may blink occasionally as it tests the SCSI drives). NOTE: For information on the CR3500 RAID Controller LED indicators, see Appendix G, "Status LED Indicators." 12. Restore the controller configuration settings saved in Step 3. 13. Power down the shared storage area. 14. Press the ejector button on the blanking panel . 15. Swing the lever outward. 16. Pull out the blanking panel from the system. 3 2 1 Figure 4-32. Removing the blanking panel