Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 138
the LAN. Slot 2 is populated with a Dual-Channel Wide Ultra2 SCSI
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Installing Hardware Options 4-51 In each server node, Slot 1 populated with an NIC that connects the node to the LAN. Slot 2 is populated with a Dual-Channel Wide Ultra2 SCSI Controller that connects the server node to the rest of the system. CAUTION: The boards in slots 1 and 2 of both server nodes are required for the proper operation of the system. Removing any of these boards will disrupt the transfer of data to and from the server nodes. ACT / LINK 4 SERVER NODE 1 SERVER NODE 2 3 2 B 1 A B ACT / LINK A ACT / LINK Figure 4-53. Locating expansion slots Slots 3 and 4 in each server node are available for the installation of expansion boards. IMPORTANT: Compaq recommends that both server nodes be configured identically.
Installing Hardware Options
4-51
In each server node, Slot 1 populated with an NIC that connects the node to
the LAN. Slot 2 is populated with a Dual-Channel Wide Ultra2 SCSI
Controller that connects the server node to the rest of the system.
CAUTION:
The boards in slots 1 and 2 of both server nodes are required for the
proper operation of the system. Removing any of these boards will disrupt the
transfer of data to and from the server nodes.
ACT / LINK
ACT / LINK
4
3
2
1
ACT / LINK
Figure 4-53.
Locating expansion slots
Slots 3 and 4 in each server node are available for the installation of expansion
boards.
IMPORTANT:
Compaq recommends that both server nodes be configured identically.