Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 213
Saving the Hardware Settings, Resetting the Mouse and Keyboard
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
F-12 Compaq ProLiant CL380 User Guide VERSION Firmware Hardware Port 1 x.x.x x x x NODE 1 Keyboard ENABLED Rate 2C LEDs 2 Mode 2 Type 101 Mouse DISABLED Rate 100 Res 2 Type Gen 2. To display version information for an auxiliary device, press F2. 3. Press Esc to close the Version screen. Saving the Hardware Settings Whenever you add or remove computers to or from the system, or whenever you change the mouse or monitor, you should save the hardware settings. If you do not save the settings, they are lost when power is lost or turned off, and it might be necessary to reboot each computer to reestablish keyboard and mouse communication. To save the hardware settings: 1. From the Commands menu in the Advanced Menus screen, highlight Snapshot. 2. Press Enter. Resetting the Mouse and Keyboard If the keyboard or mouse locks up, you may be able to recover the device settings by resetting the switch. Resetting the mouse and keyboard attempts to restore the correct settings for the selected computer. To reset the mouse and keyboard values: 1. From the Commands menu in the Advanced Menus, highlight Reset and press Enter.