Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 84

Installing the ProLiant CL380 Rack Model 3-31 5. Carefully align the three screw holes on each side of the system and the slide rail assembly. Attach the system to the slide rail assembly with six 8-32 slotted head screws. CAUTION: Be sure to keep the system parallel to the floor when sliding the system rails into the slide rails. Tilting the system up or down could result in damage to the rails. Figure 3-21. Attaching the system to the slide rails 6. Remove the rack lift assists. Store the rack lift assists and screws for future use if the system needs to be removed from the rack. WARNING: To reduce the risk of personal injury, be careful when pressing the component rail release latches and sliding the component into the rack. The slide rails could pinch your fingertips. 7. Slide the system in and out of the rack several times to properly align the slide rail assembly. IMPORTANT: The first time you slide the component into the rack, you may have to apply some pressure. After the first time, the ball bearings in the slide will move easily. 8. Replace the top access panel.