Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 77
Attaching the Slide Rail Assembly to the Rack
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3-24 Compaq ProLiant CL380 User Guide 3. Align the front screw holes in the slide rail and the mounting bracket. 4. Fasten the slide rail to the mounting bracket with three 8-32 x 1/4-inch slotted screws . Retract the inner slide to access the fourth screw hole that was covered when you attached the first three screws. Attach the fourth screw . NOTE: Align the holes carefully. If the slide rail assembly is not lined up correctly, it will not slide closed. 1 1 3 2 2 Figure 3-14. Attaching the slide rail to the mounting bracket 5. Repeat steps 1 through 4 for the other slide rail and mounting bracket. Attaching the Slide Rail Assembly to the Rack Attaching the slide rail assembly to the rack consists of the following: Marking the system's rack position with the template Inserting cage nuts into the back of the rack Installing the slide rail assembly on the rack