Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 28
Server Nodes, A low-profile IDE CD-ROM drive
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1-14 Compaq ProLiant CL380 User Guide Server Nodes Each server node supports up to six drives: Two available half-height 5.25-inch removable media bays (A and B as seen in figure 1-10) NOTE: The removable media bays can be used for one 5.25-inch, full-height device, or two 5.25 inch, half height devices. An additional 1-inch Ultra2 or Ultra3 SCSI drive that can be plugged into bays A or B NOTE: When combining Ultra2 and Ultra3 hard drives, all of the drives are limited to response times no faster than the maximum burst rate of up to 80 MB/s on the Ultra2 SCSI bus, or the transfer rate of the slowest device in the array. An optional 2x1-inch drive cage that supports up to two 1-inch Ultra2 or Ultra3 SCSI drives NOTE: For more information on the optional 2x1 inch hot-plug drive cage, see Chapter 4, "Installing Hardware Options." A low-profile IDE CD-ROM drive A 3.5-inch, 1.44-MB diskette drive, installed in the vertical position