D-Link DES-3326SRM Product Manual - Page 28
Password Protection, create account admin, Success
UPC - 790069255304
View all D-Link DES-3326SRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
D-Link DES-3326S Layer 3 Switch Password Protection The DES-3326S does not have a default user name and password. One of the first tasks when settings up the Switch is to create user accounts. If you log in using a predefined administrator-level user name you have privileged access to the Switch's management software. After your initial login, define new passwords for both default user names to prevent unauthorized access to the Switch, and record the passwords for future reference. To create an administrator-level account for the Switch, do the following: 1. At the CLI login prompt, enter create account admin followed by the and press the Enter key. 2. You will be asked to provide a password. Type the used for the administrator account being created and press the Enter key. 3. You will be prompted to enter the same password again to verify it. Type the same password and press the Enter key. 4. Successful creation of the new administrator account will be verified by a Success message. User names and passwords can be up to 15 characters in length. NOTE: Passwords are case sensitive. The sample below illustrates a successful creation of a new administrator-level account with the user name "newmanager". Figure 2 - 1. Create a new administrator account with CLI NOTICE: CLI configuration commands only modify the running configuration file and are not saved when the Switch is rebooted. To save all your configuration changes in nonvolatile storage, you must use the save command to copy the running configuration file to the startup configuration. 18