D-Link DES-3326SRM Product Manual - Page 94
Access Profile Rule Configuration - IP, Access Rule ID
UPC - 790069255304
View all D-Link DES-3326SRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
D-Link DES-3326S Layer 3 Switch The following window is used for the IP Rule configuration. Figure 14- 6. Access Profile Rule Configuration - IP Configure the following Access Profile Rule - IP settings: Parameter Description Permit/Deny Select Permit to specify that the packets that match the access profile are forwarded by the switch according to any additional rule added (see below). Select Deny to specify that packets that do not match the access profile are not forwarded by the switch and will be filtered. Access Rule ID Adds an additional rule to the above specified access profile. The value is used to index the rule created. Source IP Enter an IP address for the source IP address. Destination IP priority replace_priority replace_dscp: Destination IP - Enter an IP address for the destination IP address. Select this option to instruct the switch to use the 802.1p priority value entered in the adjacent field for packets that meet the criteria. A number between 0 − lowest priority, and 7 − highest priority, can be entered. Select this option to instruct the switch to replace the 802.1p value (in a packet that meets the selected criteria). In this way, packets meeting the criteria can have their priority handling modified for use within the switch, and then have a different priority value assigned when they leave the switch. Select this option to instruct the switch to replace the DSCP value (in a packet that meets the selected criteria) with the value entered in the adjacent field. 84