D-Link DES 6000 Product Manual - Page 121

Firmware and Configuration Update, Apply, Software Update Mode, TFTP Server Address, Firmware Update

Get D-Link DES 6000 - Switch PDF manuals and user guides
UPC - 790069239328
View all D-Link DES 6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 121 highlights

Firmware and Configuration Update Modular Ethernet Switch User's Guide Figure 7-59. Firmware and Configuration Update window To update the switching software (firmware) or load settings from a configuration file, fill in the requested information above and then click the Apply button. The information is described as follows: Software Update Mode & TFTP Server Address: ♦ Software Update Mode Set to either Network or SLIP. Determines whether the new firmware code or configuration file should be obtained through the Ethernet network or through the console port. ♦ TFTP Server Address The IP address of the TFTP server where the new firmware image file or configuration file is located. ♦ Last TFTP Server Address This read-only field displays the IP address of the last TFTP server used. Update Management Module Firmware: ♦ Firmware Update Determines whether or not the Switch should download its new firmware code the next time it is restarted. ♦ File Name The path and the name on the TFTP server which holds the new firmware image file. Change Configuration File: ♦ Use Config File Toggle to Enabled to use a configuration text file when the Switch is reset (rebooted). Determines whether or not the Switch should retrieve settings from a configuration file the next time it is booted. ♦ Config File Name The complete path and filename on the TFTP server for the configuration file to use. The configuration file is a text file containing IP settings for the switch. Please refer to the "Sample Configuration File" appendix at the back of this manual for more information on creating a configuration file. 116 Web-Based Network Management

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Modular Ethernet Switch User’s Guide
116
Web-Based Network Management
Firmware and Configuration Update
Figure 7-59.
Firmware and Configuration Update window
To update the switching software (firmware) or load settings from a configuration file, fill in the
requested information above and then click the
Apply
button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
♦
Software Update Mode
Set to either
Network
or
SLIP
. Determines whether the new firmware code
or configuration file should be obtained through the Ethernet network or through the console port.
♦
TFTP Server Address
The IP address of the TFTP server where the new firmware image file or
configuration file is located.
♦
Last TFTP Server Address
This read-only field displays the IP address of the last TFTP server
used.
Update Management Module Firmware:
♦
Firmware Update
Determines whether or not the Switch should download its new firmware code
the next time it is restarted.
♦
File Name
The path and the name on the TFTP server which holds the new firmware image file.
Change Configuration File:
♦
Use Config File
Toggle to
Enabled
to use a configuration text file when the Switch is reset (rebooted).
Determines whether or not the Switch should retrieve settings from a configuration file the next time it
is booted.
♦
Config File Name
The complete path and filename on the TFTP server for the configuration file to
use. The configuration file is a text file containing IP settings for the switch. Please refer to the
“Sample
Configuration File”
appendix at the back of this manual for more information on creating a
configuration file.