D-Link DES 6000 Product Manual - Page 72

Save Settings to TFTP Server, Ping Test screen

Get D-Link DES 6000 - Switch PDF manuals and user guides
UPC - 790069239328
View all D-Link DES 6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Modular Ethernet Switch User's Guide Figure 6-51. Ping Test screen After filling in the fields above, press START to initiate the Ping test. The fields you can set are: ♦ Destination IP Address The IP address of the device to be Pinged. ♦ No. of Pings Number of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will continue Pinging indefinitely. In the lower part of the Ping Test screen, you can view the Results of the Ping test. Save Settings to TFTP Server Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main menu) to access the following screen: Figure 6-52. Save Settings to TFTP Server screen Press START to begin the upload. The result will be displayed in the lower part of the screen. The fields you can set are: ♦ Server IP Address The IP address of the TFTP server where you wish to save the settings for the Switch. Using the Console Interface 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Modular Ethernet Switch User’s Guide
Using the Console Interface
67
Figure 6-51.
Ping Test screen
After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
♦
Destination IP Address
The IP address of the device to be Pinged.
♦
No. of Pings
Number of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will
continue Pinging indefinitely.
In the lower part of the
Ping Test
screen, you can view the Results of the Ping test.
Save Settings to TFTP Server
Choose
Save Settings to TFTP Server
from the
Utilities
menu (under
System Utilities
on the main
menu) to access the following screen:
Figure 6-52. Save Settings to TFTP Server screen
Press START to begin the upload. The result will be displayed in the lower part of the screen.
The fields you can set are:
♦
Server IP Address
The IP address of the TFTP server where you wish to save the settings for the
Switch.