D-Link DGS-3620-52P CLI Guide - Page 1001
config box_priority current_box_id
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1001 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - Enter the current box ID value used here. This value must be between 1 and 12. new_box_id - Specifies the new ID assigned to the box. auto - Specifies that the box ID to be assigned automatically by the stack system. The new box ID will take effect after the next boot. - Enter the new box ID used here. This value must be between 1 and 12. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure box ID of box 1 to be auto: DGS-3620-28SC:admin# config box_id current_box_id 1 new_box_id auto Command: config box_id current_box_id 1 new_box_id auto Success. DGS-3620-28SC:admin# 93-7 config box_priority current_box_id Description This command configures the priority of switch, which will determines which box becomes master. Lower number means higher priority. New priority will take effect after user reboot Format config box_priority current_box_id priority Parameters - Enter the current box ID value used here. This value must be between 1 and 12. priority - Specifies the priority assigned to the box, with lower number meaning higher priority. - Enter the priority value used here. This value must be between 1 and 63. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure box priority: DGS-3620-28SC:admin# config box_priority current_box_id 1 priority 1 Command: config box_priority current_box_id 1 priority 1 Success. DGS-3620-28SC:admin# 996