D-Link DGS-3620-52P CLI Guide - Page 85
Parameters
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide dst_port_mask } | protocol_id_mask {user_define_mask }]}(1) | packet_content_mask {offset_chunk_1 | offset_chunk_2 | offset_chunk_3 | offset_chunk_4 }(1) | ipv6 {class | flowlabel | source_ipv6_mask | destination_ipv6_mask | [tcp {src_port_mask | dst_port_mask } | udp {src_port_mask | dst_port_mask } | icmp {type | code}]}(1)] Parameters - Specify the profile ID between 1 and 6. The lower the profile ID, the higher the priority. profile_name - Specify a profile name. - The maximum length is 32 characters. ethernet - Specify an Ethernet access control list rule. vlan - Specify a VLAN mask. Only the last 12 bits of the mask will be considered. - (Optional) Specify a VLAN mask. source_mac - Specify the source MAC mask. - Specify the source MAC mask. destination_mac - Specify the destination MAC mask. - Specify the destination MAC mask. 802.1p - Speciy the 802.1p priority tag mask. ethernet_type - Specify the Ethernet type. ip - Specify an IP access control list rule. vlan - Specify a VLAN mask. Only the last 12 bits of the mask will be considered. - (Optional) Specify a VLAN mask. source_ip_mask - Specify an IP source submask. - Specify an IP source submask. destination_ip_mask - Specify an IP destination submask. - Specify an IP destination submask. dscp - Specify the DSCP mask. icmp - Specify that the rule applies to ICMP traffic. type - (Optional) Specify the ICMP packet type. code - (Optional) Specify the ICMP code. igmp - Specify that the rule applies to IGMP traffic. type - (Optional) Specify the IGMP packet type. tcp - Specify that the rule applies to TCP traffic. src_port_mask - (Optional) Specify the TCP source port mask. - Specify the TCP source port mask. dst_port_mask - (Optional) Specify the TCP destination port mask. - Specify the TCP destination port mask. flag_mask - (Optional) Specify the TCP flag field mask. all - Specify to check all paramenters below. urg - (Optional) Specify Urgent Pointer field significant. ack - (Optional) Specify Acknowledgment field significant. psh - (Optional) Specify Push Function. rst - (Optional) Specify to reset the connection. syn - (Optional) Specify to synchronize sequence numbers. fin - (Optional) No more data from sender. udp - Specify that the rule applies to UDP traffic. src_port_mask - (Optional) Specify the TCP source port mask. - Specify the TCP source port mask. dst_port_mask - (Optional) Specify the TCP destination port mask. - Specify the TCP destination port mask. protocol_id_mask - Specify that the rule applies to the IP protocol ID traffic. - Specify that the rule applies to the IP protocol ID traffic. user_define_mask - (Optional) Specify the L4 part mask. - Specify the L4 part mask. 80