D-Link DGS-3620-52P CLI Guide - Page 1078
VLAN Commands
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1078 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 106 VLAN Commands create vlan tag {type [1q_vlan | private_vlan]} {advertisement} create vlan vlanid {type [1q_vlan | private_vlan]} {advertisement} delete vlan delete vlan vlanid config vlan {[add [tagged | untagged | forbidden] | delete] | advertisement [enable | disable]}(1) config vlan vlanid {[add [tagged | untagged | forbidden] | delete] | advertisement [enable | disable] | name }(1) config port_vlan [ | all] {gvrp_state [enable | disable] | ingress_checking [enable | disable] | acceptable_frame [tagged_only | admit_all] | pvid }(1) show port_vlan {} config gvrp [timer [join | leave | leaveall] | nni_bpdu_addr [dot1d | dot1ad]] enable gvrp disable gvrp show vlan {} show vlan vlanid show vlan ports {} show gvrp config private_vlan [ | vid ] [add [isolated | community] | remove] [ | vlanid ] show private_vlan {[ | vlanid ]} enable pvid auto_assign disable pvid auto_assign show pvid auto_assign 106-1 create vlan Description This command is used to create a VLAN on the switch. The VLAN ID must be always specified for creating a VLAN. Format create vlan tag {type [1q_vlan | private_vlan]} {advertisement} Parameters - Specify the name of the VLAN to be created. The maximum length is 32 characters. tag - Specify the VLAN ID of the VLAN to be created. - The range is from 2 to 4094. type - (Optional) Specify the type of VLAN to be created. 1q_vlan - Specify the VLAN is a 802.1q VLAN. private_vlan - Specify the VLAN is a private VLAN. advertisement - (Optional) Specify to allow the Switch sending out GVRP packets to outside sources, notifying that they may join the existing VLAN. 1073