D-Link DGS-3620-52P CLI Guide - Page 171
create bgp neighbor, delete bgp neighbor
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 12-20 create bgp neighbor Description The command is used to create a BGP neighbor. Either a single router or a peer group can be created as neighbor. If the created neighbor has a single IP address, the remote AS must be specified. A peer group must be specified of which this BGP speaking neighbor belongs to, and in this condition, a remote AS must be specified to the peer group first. If the created neighbor is a peer group, then the remote AS cannot be specified here. The remote AS must specified by using the "config peer_group remote_as" command. Format create bgp neighbor [ [remote_as | peer_group ] | peer_group ] Parameters - Enter the IP address of the BGP speaking neighbor here. remote_as - The number of Autonomous Systems to which the neighbor belongs. - Enter the remote AS number here. This value must be between 1 and 65535. peer_group - Specifies the peer group to be created and added as a neighbor. - Enter the peer group name here. This name can be up to 16 characters long. peer_group - Specifies the peer group to be created and added as a neighbor. - Enter the peer group name here. This name can be up to 16 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To create a neighbor peer whose address is 10.10.10.2: DGS-3620-28SC:admin# create bgp neighbor 10.10.10.2 remote_as 10 Command: create bgp neighbor 10.10.10.2 remote_as 10 Success. DGS-3620-28SC:admin# 12-21 delete bgp neighbor Description This command is used to delete the BGP neighbor. 166