D-Link DGS-3620-52P CLI Guide - Page 101
Optional Specify Acknowledgment field significant.
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide ethernet_type - Specify the Ethernet type. - Specify the Ethernet type. ip - Specify an IP access control list rule. vlan - Specify the VLAN name. -Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID. - Specify the VLAN ID between 1 and 4094. source_ip - Specify an IP source address. - Specify an IP source address. destination_ip - Specify an IP destination address. - Specify an IP destination address. dscp - Specify the value of DSCP. - Specify the value of DSCP. The DSCP value ranges from 0 to 63. icmp - Specify the ICMP. type - (Optional) Specify that the rule will apply to the ICMP Type traffic value. - Specify the value between 0 and 255. code - (Optional) Specify that the rule will apply to the ICMP Code traffic value. - Specify the value between 0 and 255. igmp - Specify the IGMP. type - (Optional) Specify that the rule will apply to the IGMP Type traffic value. - Specify the value between 0 and 255. tcp - Specify TCP. src_port - (Optional) Specify that the rule will apply to a range of TCP source ports. - Specify the value between 0 and 65535. dst_port - (Optional) Specify that the rule will apply to a range of TCP destination ports. - Specify the value between 0 and 65535. flag - Specify the TCP flag field value. all - Specify to check all paramenters below. urg - (Optional) Specify Urgent Pointer field significant. ack - (Optional) Specify Acknowledgment field significant. psh - (Optional) Specify Push Function. rst - (Optional) Specify to reset the connection. syn - (Optional) Specify to synchronize sequence numbers. fin - (Optional) No more data from sender. udp - Specify UDP. src_port - (Optional) Specify the UDP source port range. - Specify the value between 0 and 65535. dst_port - (Optional) Specify the UDP destination port range. - Specify the value between 0 and 65535. protocol_id - Specify that the rule will apply to the value of IP protocol ID traffic. - Specify the value between 0 and 255. user_define - (Optional) Specify that the rule will apply to the IP protocol ID and that the mask options behind the IP header, which has a length of 4 bytes. - Specify that the rule will apply to the IP protocol ID and that the mask options behind the IP header , which has a length of 4 bytes. packet_content - Specifies that the access control list rule will be set to packet content. offset_0-15 - Specify the mask for packet bytes 0-15. - Specify the mask for packet bytes 0-3. - Specify the mask for packet bytes 4-7. - Specify the mask for packet bytes 8-11. - Specify the mask for packet bytes 12-15. offset_16-31 - Specify the mask for packet bytes 16-31. - Specify the mask for packet bytes 16-19. - Specify the mask for packet bytes 20-23. - Specify the mask for packet bytes 24-27. - Specify the mask for packet bytes 28-31. offset_32-47 - Specify the mask for packet bytes 32-47 - Specify the mask for packet bytes 32-35. - Specify the mask for packet bytes 36-39. - Specify the mask for packet bytes 40-43. 96