D-Link DGS-3620-52P CLI Guide - Page 119
show egress_access_profile
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide the "counter" is overridden. enable - Specifies that the ACL counter feature will be enabled. disable - Specifies that the ACL counter feature will be disabled. deny - Specifies the packets that match the egress access rule are filtered by the switch. time_range - (Optional) Specifies the name of the time range entry. - Enter the time range value here. This name can be up to 32 characters long. delete - Specifies to delete a profile or rule. access_id - Specifies the index of the access list entry. If the auto_assign option is selected, the access ID is automatically assigned. - Enter the access ID used here. This value must be between 1 and 128. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure a port-base egress access rule that when the packet go out switch which match the specified source IP, DSCP and destination IP field, it will not be dropped: DGS-3620-28SC:admin# config egress_access_profile profile_id 2 add access_id auto_assign ip source_ip 10.0.0.1 dscp 25 destination_ip 10.90.90.90 port_group id 1 permit Command: config egress_access_profile profile_id 2 add access_id auto_assign ip source_ip 10.0.0.1 dscp 25 destination_ip 10.90.90.90 port_group id 1 permit Success. DGS-3620-28SC:admin# To configure a vlan-base egress access rule that when the packet go out switch which match the specified source MAC field, it will be dropped: DGS-3620-28SC:admin# config egress_access_profile profile_id 2 add access_id 1 ethernet source_mac 11-22-33-44-55-66 vlan_based vlan_id 1 deny Command: config egress_access_profile profile_id 2 add access_id 1 ethernet source_mac 11-22-33-44-55-66 vlan_based vlan_id 1 deny Success. DGS-3620-28SC:admin# 6-4 show egress_access_profile Description This command is used to display current egress access list table. Format show egress_access_profile {[profile_id | profile_name ]} 114