D-Link DGS-3620-52P CLI Guide - Page 447
Filter Commands
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 447 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 35 Filter Commands config filter dhcp_server [add permit server_ip {client_mac } ports [ | all] | delete permit server_ip {client_mac } ports [ | all] | ports [ | all] state [enable | disable] | illegal_server_log_suppress_duration [1min | 5min | 30min] | trap_log [enable | disable]] show filter dhcp_server config filter extensive_netbios [ | all] state [enable | disable] show filter extensive_netbios config filter netbios [ | all] state [enable | disable] show filter netbios 35-1 config filter dhcp_server Description This command has two purposes: to specify to filter all DHCP server packets on the specific port and to specify to allow some DHCP server packets with pre-defined server IP addresses and client MAC addresses. With this function, we can restrict the DHCP server to service specific DHCP clients. This is useful when two DHCP servers are present on the network; one of them can provide the private IP address and the other can provide the public IP address. Enabling filter DHCP server port state will create one access profile and create one access rule per port (UDP port = 67). Filter commands in this file will share the same access profile. Addition of a permit DHCP entry will create one access profile and create one access rule. Filter commands in this file will share the same access profile. Format config filter dhcp_server [add permit server_ip {client_mac } ports [ | all] | delete permit server_ip {client_mac } ports [ | all] | ports [ | all] state [enable | disable] | illegal_server_log_suppress_duration [1min | 5min | 30min] | trap_log [enable | disable]] Parameters add permit server_ip - Specify the IP address of the DHCP server to be permitted. - Specify the IP address. client_mac - (Optional) Specify the MAC address of the DHCP client. - Specify the MAC address. ports - Specify the ports. - Specify the range of ports to be configured. all - Specify to configure all ports. delete permit server_ip - Specify the delete permit server IP address. - Specify the IP address. client_mac - (Optional) Specify the MAC address of the DHCP client. - Specify the MAC address. ports - Specify the ports. - Specify the range of ports to be configured. all - Specify to configure all ports. ports - Specify the ports. - Specify the range of ports to be configured. 442