D-Link DGS-3620-52P CLI Guide - Page 599
show max_mcast_group
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 599 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide drop - The new group will be dropped. replace - The new group will replace the oldest group in the register table. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the maximum number of multicast groups that ports 1 and 3 can join to 100: DGS-3620-28SC:admin# config max_mcast_group ports 1, 3 max_group 100 Command: config max_mcast_group ports 1, 3 max_group 100 Success. DGS-3620-28SC:admin# 51-9 show max_mcast_group Description This command is used to display the maximum number of multicast groups that a port or VLAN can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied. Format show max_mcast_group [ports | vlanid ] {[ipv4 | ipv6]} Parameters ports - Specify a range of ports to display the maximum number of multicast groups. - Specify a range of ports to be displayed. vlanid - Specify the VLAN ID for displaying the maximum number of multicast groups. - Enter the VLAN ID of the VLAN here. ipv4 - (Optional) Specify to display the maximum number of IPv4 learned addresses. ipv6 - (Optional) Specify to display the maximum number of IPv6 learned addresses. Restrictions None. Example To display the maximum number of multicast groups for ports 1-2: 594