D-Link DGS-3620-52P CLI Guide - Page 78
delete authen server_host
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide seconds. The timeout value must be between 1 and 255 seconds. retransmit - Specify the count for re-transmit. This value is meaningless for TACACS+. The default value is 2. - Specify the count for re-transmit. This value is meaningless for TACACS+. The default value is 2. The re-transmit value must be between 1 and 20. Restrictions Only Administrator-level users can issue this command. Example To configure a TACACS+ authentication server host's key value: DGS-3620-28SC:admin#config authen server_host 10.1.1.222 protocol tacacs+ key "abc123" Command: config authen server_host 10.1.1.222 protocol tacacs+ key "abc123" Success. DGS-3620-28SC:admin# 4-20 delete authen server_host Description This command is used to delete an authentication server host. Format delete authen server_host protocol [tacacs | xtacacs | tacacs+ | radius] Parameters - Specify the server host's IP address. protocol - Specify the server host's type of authentication protocol. tacacs - Specify the server host's authentication protocol TACACS. xtacacs - Specify the server host's authentication protocol XTACACS. tacacs+ - Specify the server host's authentication protocol TACACS+. radius - Specify the server host's authentication protocol RADIUS. Restrictions Only Administrator-level users can issue this command. Example To delete an authentication server host: DGS-3620-28SC:admin#delete authen server_host 10.1.1.222 protocol tacacs+ Command: delete authen server_host 10.1.1.222 protocol tacacs+ Success. 73