D-Link DGS-3620-52P CLI Guide - Page 1051
show boot_file
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1051 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide # # Firmware: Build 2.00.015 # Copyright(C) 2012 D-Link Corporation. All rights reserved. # STACK config stacking force_master_role state disable # DEVICE config temperature threshold high 79 config temperature threshold low 11 config temperature trap state enable config temperature log state enable CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All 103-12 show boot_file Description This command is used to display the configuration file and firmware image assigned as boot up files. Format show boot_file Parameters None. Restrictions None. Example To display the configuration file and firmware image assigned as a boot up file: DGS-3620-28SC:admin#show boot_file Command: show boot_file Bootup Firmware : c:/runtime.had Bootup Configuration : c:/config.cfg DGS-3620-28SC:admin# 1046